Kospel electric boilers are distinguished by easy installation, without the need for chimney access or strict ventilation requirements. They are suitable for both new buildings and the modernization of existing installations. They offer the possibility to integrate with photovoltaic systems and heat pumps, which can significantly reduce heating costs.
The Kospel selection calculator is a free tool that helps estimate the approximate energy consumption and costs associated with the operation of an electric boiler based on your answers.
Our Extended Warranty program promises that we will be with you every step of the way, providing the reliability and efficiency you expect. With us, your investments are secured for the future.
To properly select a boiler, you need to determine the heat power demand of the house. The most reliable way is to check the project, where the heat source power is appropriately specified. If that's not possible, you can estimate approximately 100W of power per square meter of heated area. This rule applies to buildings from the 1990s onwards. The power selection indicator will be higher for older buildings and, of course, lower for low-energy construction.
The energy consumption of an electric boiler depends on several factors. The first aspect to consider is the amount of energy needed for heating and ventilation as documented in the energy characteristics of the heated building. If such a document is not available, you can refer to the amount of fuel currently used for heating purposes.
A well-designed photovoltaic installation is characterized by its ability to supply electricity for the user's household needs (appliances, electronics, lighting, etc.). If your home is heated with an electric boiler, the installation should produce the amount of kWh required for both heating and household needs. If the electric boiler is an additional source of heating, the installation should ensure sufficient energy for household needs and for the specified operational time of the boiler (e.g., during autumn/spring).
The installation requirements for a Kospel electric boiler are quite detailed and must be strictly followed to ensure safe and efficient operation. The installation process includes:
1. Hiring professionals: The installation of the boiler, as well as the electrical and plumbing installation, should be entrusted to qualified professionals from a service company who have the appropriate experience and authorization to work with such devices.
2. Following instructions: All manufacturer guidelines contained in the installation and operation manual must be strictly followed to ensure that all actions comply with technical requirements and safety standards.
3. Central heating (CH) installation: The system should be equipped with a diaphragm expansion tank according to standard PN-B-02414:1999, which applies to closed systems. This is important for proper operation and pressure balancing in the installation.
4. Preparing the heating installation: Before installing the boiler, the entire heating system must be thoroughly flushed to remove any contaminants and prevent damage to the device.
5. Installation requirements: The boiler must be mounted on a flat wall to ensure stability and safe operation.
Additionally, it's best to take into account all local regulations and standards related to the installation of heating devices. Before proceeding with installation, it is also recommended to consult with the boiler manufacturer or an authorized service technician to obtain detailed instructions and potential updates regarding installation requirements.
To select the appropriate boiler power, it is necessary to consider a number of factors that determine its efficiency. Key aspects include:
1. Usable area – defines the size of the space that the boiler will heat.
2. Building insulation level – the better the thermal insulation, the less heating power is needed.
3. Climate zone – the atmospheric conditions at the boiler installation site significantly affect its selection.
4. Need for domestic hot water heating – if the boiler is to provide hot water, it is important to determine the demand, which depends on the number of people in the household and their habits.
Other factors to consider include room height, the presence of ventilation systems, and user temperature preferences. Precisely analyzing these elements will allow for the selection of a boiler with optimal power, ensuring thermal comfort with efficient energy consumption.
Yes, an electric boiler can be installed in furniture housing, but it's a decision that requires careful consideration and planning. It's essential to follow the manufacturer's recommendations regarding so-called service dimensions. These dimensions specify the minimum clearances needed around the device to ensure access to the boiler for maintenance, servicing, or in case of the need for dismantling.
Kospel electric boilers can be considered energy-efficient devices, given their very high efficiency in converting electrical energy to thermal energy, which is about 99.34%. This means almost all the electricity used is transformed into heat energy, indicating energy efficiency.
However, the energy efficiency of a boiler in practice, or its actual energy consumption, will depend on various factors, including:
1. The building's heat demand – better insulation and lower heat demand mean less energy is needed to heat the spaces.
2. Type of building – modern passive or energy-saving buildings are designed to minimize heating requirements, resulting in lower electricity consumption by the boiler.
3. User behavior – the habits and preferences of residents regarding room temperature and the use of hot water have a significant impact on energy consumption.
Kospel electric boilers can be controlled in several ways:
1. Using potential-free contacts, which allow for the connection of external automation (room regulators), enabling simple "on/off" operation.
2. Boilers from the M3 series have built-in automation and temperature sensors, allowing you to set heating and hot water schedules directly on the boiler.
Unlike gas boilers, Kospel electric boilers do not require annual service inspections. Although having an installer perform a check before the heating season is a good idea to ensure the system is functioning correctly, it is not mandatory. Regularly checking the boiler's technical condition can help ensure its efficient operation and extend its lifespan.
Yes, Kospel electric boilers can be connected to underfloor heating systems as well as traditional radiators. They offer flexibility in designing a home's heating system.
Kospel electric boilers offer several advantages that make them an attractive alternative to gas or solid fuel boilers. Here are a few:
1. Convenience and Comfort:
- No need to store fuel, as is required with solid fuel boilers.
- Automatic operation of the boiler, not requiring physical handling, such as loading coal.
2. Ease of Installation:
- Boilers are compact and can be installed in various locations, even in limited spaces.
- The installation process is generally less complicated and cheaper than gas installations, which require special connections and chimneys.
3. Ecology:
- No emissions of fumes and other pollutants during use, which is beneficial for the environment.
- Possibility to be powered by renewable energy sources, which can further reduce the carbon footprint of heating.
4. Flexibility:
- Kospel electric boilers can work with other heating systems, allowing for the creation of hybrid heating systems.
- Easy adjustment of power and efficiency to the building's needs.
5. Low Maintenance Requirements:
- Lack of moving parts and combustion processes significantly reduces the risk of failure and lowers servicing costs.
6. Independence:
- Electric heating allows independence from gas suppliers or the volatility of solid fuel prices.
7. Safety:
- Eliminates the risk of carbon monoxide poisoning, gas leaks, or explosions, which can occur with gas or solid fuel systems.
Kospel electric boilers can be an excellent choice for those who value convenience, safety, and are looking for ecological and economical solutions for heating their home.
Kospel electric boilers typically come with a standard 2-year warranty. There is an option to extend the warranty by 1, 2, or 3 years through the KOSPEL SAFE program. To learn about the details and conditions of the program, it's advisable to visit the website https://gwarancja.kospel.pl/. The warranty generally covers the repair or replacement of parts that fail due to manufacturing or material defects, excluding damages caused by improper use or installation.
Electric central heating boilers are an excellent alternative to traditional heating systems, offering users comfort and modern technical solutions. Choosing an electric central heating boiler gives you the possibility of integration with a photovoltaic system, which can significantly reduce heating costs and make the system more environmentally friendly. Unlike conventional stoves, electric boilers are distinguished by their exceptional simplicity of installation—they do not require connection to a chimney or meeting strict ventilation requirements. These features make electric central heating boilers an ideal choice both for newly built homes and during the modernization of existing heating installations, providing effective and economical heating of living spaces with minimal effort from the user.
English 
