Out-of-Stock

HPM2.C

HPM2.C - Heat pump system consisting of the external unit HPMO2 and the internal 3in1 type HPMD unit for installation in new and renovated houses.

The HPM2.C system includes:

external unit HPMO2
internal "3in1" type HPMD unit
external temperature sensors
room temperature sensors
2 heating circuit sensors

Where to buy?

Description

Internal Unit HPMD 3in1

Combines the functions of (1) a hydraulic module with a system controller, (2) a domestic hot water tank, and (3) a heating buffer. Its compact design allows for easy installation.

heat pump control panel
contaminant separator
circulation pump
safety valve, electronic pressure gauge, automatic air vent
electric heating unit
three-way diverter valve
remote control (C.MI2 module)
compatible with other heat sources, e.g., gas boiler
Amount of domestic hot water optimal for 3-5 people
electronic anode (titanium)
supports heat pump defrosting as well as room heating and cooling
partition prevents mixing of hot supply water with cold water returning to the buffer

External Unit HPMO2

Inverter monoblock heat pump

Energy class: A+++(35 °C)/A++ (55 °C)
EVI injection system ensures high efficiency and water temperature up to 60°C
Broad operating range at external air temperatures from -25°C to +43°C
Quiet operation – sound pressure level at 1m distance: 41 to 51 dB(A) depending on the chosen device power - Q2 coefficient
Planar room cooling or compatibility with fan coil units
Condensate frost protection
Smooth power modulation ensures optimal operation depending on heating needs:

HPMO2-8: from 2.3 to 8.2kW (A7/W35)
HPMO2-12: from 3.8 to 12.5kW (A7/W35)
HPMO2-16/23: from 7 to 23kW (A7/W35)

Watch the video and learn about the KOSPEL heat pump heating system

Installation diagram

Additional equipment

Product Code	Description
C.MI2	The C.MI2 internet module allows remote control of the heat pump via the internet using a computer, tablet, or smartphone. Control is done through a web browser, providing easy and intuitive operation, as well as access to all advanced device control functions.
HP.FF	Vibration isolation stand (base) for the heat pump 600x190x200 (2 pieces in the set).
WE-019/01	Temperature sensor for the storage tank / buffer.
WE-019/05	Temperature sensor for the heating circuits.
HP.HS.24	24V humidity switch to protect against moisture accumulation.

Technical data

Product code	Package components	Maximum heating power (kW)*	Maximum COP*	Energy efficiency class*	Max sound pressure level - Q2 / sound power dB(A)*	Electric heating unit	Power supply	Nominal circuit breaker current	Min. supply cable cross-section
HPM2.C-8.1	HPMO2-8 and HPMD-8	8.2 (A+7/W35) 7.1 (A+2/W35) 5.8 (A-7/W35)	4.6 (A+7/W35) 4.01 (A+2/W35) 3.49 (A-7/W35)	A+++ (W35) A++ (W55)	41 at 1m / 49	6kW	400V 3N~ / 230 V~	3x16A / 40A	5x2.5mm² / 3x6mm²
HPM2.C-12.1	HPMO2-12 and HPMD-12	12.5 (A+7/W35) 11.3 (A+2/W35) 9.2 (A-7/W35)	4.75 (A+7/W35) 3.94 (A+2/W35) 3.37 (A-7/W35)		47 at 1m / 55	6kW	400V 3N~ / 230 V~	3x25A / 50A	5x2.5mm² / 3x6mm²
HPM2.C-16.1	HPMO2-16/23 and HPMD-16	23.0 (A+7/W35) 20.5 (A+2/W35) 17.1 (A-7/W35)	4.76 (A+7/W35) 4.02 (A+2/W35) 3.47 (A-7/W35)		51 at 1m / 59	9kW	400 V 3N~	3x32A	5x2.5mm²