Out-of-Stock

HPM2.P

HPM2.P - integrated set consisting of an external unit HPMO2, an internal unit HPMI2 for installation in new and modernized installations, a central heating buffer SVK, and a domestic hot water heat exchanger SWPC, providing hot water even for 7 people.

The HPM2.P system includes:

external unit HPMO2
internal unit of type HPMI2
central heating buffer SVK
domestic hot water heat exchanger SWPC

Where to buy?

Description

HPMI2 Internal Unit

Central heating unit with weather control, equipped with a hydraulic group and an electric heating assembly

Quick installation thanks to compact housing with fitted components
Advanced control capabilities:

Weather control of heating
Daily and weekly temperature regulation cycles in rooms and hot water
Control of 2 heating circuits + hot water circuit

Electric heating assembly with automatic power modulation:

**3/6 kW for HPMO2-8 and HPMO2-12
***3/6/9 kW for HPMO2-16/23

Hydraulic group:

Three-way diverter valve that allows water heating in cooperation with the hot water exchanger
Safety group - 12-liter expansion vessel, safety valve, electronic pressure gauge, automatic air vent

Remote control via the internet using the C.MI2 module (additional equipment).

HPM2 External Unit

Pump installation is easier thanks to the built-in hydraulic group. The devices included in it are necessary for the correct operation of the installation. The hydraulic group includes:

Energy class: A+++(35 °C)/A++ (55 °C)
Coolant: R32
EVI injection system ensures high work efficiency and water temperature up to 60°C
Wide operating range at an external air temperature from -25°C to +43°C
Quiet operation of the device - acoustic pressure level at a distance of 1m: 41 to 51 dB(A) depending on the selected device power - coefficient Q2
Flat space heating or cooperation with a fan coil unit + Protection against freezing of condensate
Smooth power modulation ensures optimal operation depending on heating needs from 2.3 to 8.2 kW (A7/W35)

SVK Central Heating Buffer

Capacity: 104 liters
Energy class A - very good thermal insulation (PUR foam 65mm)
Accumulates heat in heating mode and cold in cooling mode
Extends the reliable operation time of the compressor by limiting the number of starts during transitional periods: spring - autumn
Supports the "defrost" function of the compressor without drawing energy from the heating circuits
Ensures optimal system operation by separating the hydraulic pump circuit from the heating circuits

SWPC Domestic Hot Water Heat Exchanger

Heat exchanger with the largest heating surface

Capacity: 300 liters, optimal for a 5-7 person family
Special design with two coils connected to a collector ensures a large flow and a heating surface of 4.22 m². This guarantees the highest pump efficiency.
Possibility of connecting 1 or 2 additional electric heaters

Watch the video and learn about the Kospel heat pump heating system

Technical data

Product Code	HPM2.P-8	HPM2.P-12	HPM2.P-16
Energy Efficiency Class	A+++ (35 °C) / A++ (55 °C)	A+++ (35 °C) / A++ (55 °C)	A+++ (35 °C) / A++ (55 °C)
Maximum Heat Pump Power (kW)	5.8 (A-7/W35) 7.1 (A+2/W35) 8.2 (A+7/W35)	9.2 (A-7/W35) 11.3 (A+2/W35) 12.5 (A+7/W35)	17.1 (A-7/W35) 20.5 (A+2/W35) 23.0 (A+7/W35)
Efficiency COP to:	4.6 (A+7/W35) 4.01 (A+2/W35) 3.49 (A-7/W35)	4.75 (A+7/W35) 3.94 (A+2/W35) 3.37 (A-7/W35)	4.76 (A+7/W35) 4.02 (A+2/W35) 3.47 (A-7/W35)
Sound Power Level dB (A)	49	55	59
Max Acoustic Pressure Level dB(A) - Q2 coefficient	41 from a distance of 1 meter	47 from a distance of 1 meter	51 from a distance of 1 meter
Power Supply	400 V 3N~ / 230 V~	400 V 3N~ / 230 V~	400 V 3N~~
Max Heat Carrier Temperature	60^oC	60^oC	60^oC
Nominal Overcurrent Protection Current	3x16A / 40A	3 x 25 A / 50 A	3 x 32A
Min. Power Cable Cross-Section	5 x 2.5 mm² / 3x6 mm²	5 x 2.5 mm² / 3x6 mm²	5 x 2.5 mm²
Total Heat Exchanger Capacity	305	305	305
Heat Exchange Surface Area (m²)	4.22	4.22	4.22
Coil Power (kW)	120 / 36	120 / 36	120 / 36
Insulation Thickness (mm)	67	67	67
Insulation Material	PUR	PUR	PUR
Possibility of Using Heater
Buffer Tank Capacity (L)	60	60	60
Buffer Tank Insulation Thickness (mm)	65	65	65

Sets

HPM2.P-8	HPM2.P-12	HPM2.P-16

Heat pump system includes: HPMO2-8 external unit HPMI2 internal unit SVK central heating buffer SWP domestic hot water heat exchanger	Heat pump system includes: HPMO2-12 external unit HPMI2 internal unit SVK central heating buffer SWPC domestic hot water heat exchanger	Heat pump system includes: HPMO2-16 external unit HPMI2 internal unit SVK central heating buffer SWPC domestic hot water heat exchanger
Optimal amount of domestic hot water for 3-5 persons.	Optimal amount of domestic hot water for 5-7 persons.	Optimal amount of domestic hot water for 5-7 persons.

Additional equipment

Product Code	Description
C.MI2	The C.MI2 internet module allows remote control of the heat pump via the internet using a computer, tablet, or smartphone. Control is done through a web browser, providing easy and intuitive operation, as well as access to all advanced device control functions.
HP.FF	Vibration isolation stand (base) for the heat pump 600x190x200 (2 pieces in the set).
WE-019/01	Temperature sensor for the storage tank / buffer.
WE-019/05	Temperature sensor for the heating circuits.
HP.HS.24	24V humidity switch to protect against moisture accumulation.