Out-of-Stock

SWK Termo Top

The SWK DHW cylinders is an energy-saving device of unrivaled quality. The connectors facing up enable mounting the DHW cylinders directly under the boiler and thus save a lot of space.

In a nutshell:

Cylinders with a single heating coil, all connections at the top side only. Dedicated for installation under wall-hanged central heating boiler.

Where to buy?

Description

Energy efficiency class A

SWK A cylinder ensures highest thermal insulation class

heat losses are reduced up to 50%! Comparing to efficiency class C it saves up to 320 kWh annually

High thermal insulation and esthetics

a class 65 mm insulation, made of polyurethane foam
esthetic design and resistance to mechanical damage as cylinder's casing is made out of solid ABS material

Advanced production technology

automation provides full repeatibility of the process and high precision
evenly applied layer of enamel with optimal thickness creates the highest quality protection against corrosion

Unbeatable quality

products are made of the steel grades selected by our verified suppliers
each device undergoes leakage tests and coating checks quality control

Technical data

Product code	Storage capacity (l)	Surface area of coil (m²)	Rated pressure (storage / coil) (MPa)	Power of coil (kW)	Thickness / material / type of insulation (mm)	Stand-by-losses (W)	Anode type
SWK-100.A	97	0,82	0,6 / 1,0 MPa	25	65/PUR/NR	33	AMW.M8.450
SWK-120.A	111	1,0	0,6 / 1,0 MPa	30	65/PUR/NR	36	AMW.M8.450
SWK-140.A	134	1,1	0,6 / 1,0 MPa	32	65/PUR/NR	38	AMW.M8.450
SWK-150.A	150	1,14	0,6 / 1,0 MPa	33	70/PUR/NR	39	AMW.M8.450

* Detailed warranty conditions are described in the warranty card

** Following parameters 80/10/45 C – (heating water temp./ feed water temp./domestic water temp.), flow rate of heating water through the coil 2,5 m³ /h.

*** Insulation: R- removable, NR- not removable

**** In line with EU Commission resolution no. 812/2013, 814/2013.

Dimensions