Out-of-Stock

HPM2.P

HPM2.P - integrated set consisting of an external unit HPMO2, an internal unit HPMI2 for installation in new and modernized installations, a central heating buffer SVK, and a domestic hot water heat exchanger SWPC, providing hot water even for 7 people.

The HPM2.P system includes:

external unit HPMO2
internal unit of type HPMI2
central heating buffer SVK
domestic hot water heat exchanger SWPC

Where to buy?

Description

HPMI2 Internal Unit

Central heating unit with weather control, equipped with a hydraulic group and an electric heating assembly

Quick installation thanks to compact housing with fitted components
Advanced control capabilities:

Weather control of heating
Daily and weekly temperature regulation cycles in rooms and hot water
Control of 2 heating circuits + hot water circuit

Electric heating assembly with automatic power modulation:

**3/6 kW for HPMO2-8 and HPMO2-12
***3/6/9 kW for HPMO2-16/23

Hydraulic group:

Three-way diverter valve that allows water heating in cooperation with the hot water exchanger
Safety group - 12-liter expansion vessel, safety valve, electronic pressure gauge, automatic air vent

Remote control via the internet using the C.MI2 module (additional equipment).

HPM2 External Unit

Pump installation is easier thanks to the built-in hydraulic group. The devices included in it are necessary for the correct operation of the installation. The hydraulic group includes:

Energy class: A+++(35 °C)/A++ (55 °C)
Coolant: R32
EVI injection system ensures high work efficiency and water temperature up to 60°C
Wide operating range at an external air temperature from -25°C to +43°C
Quiet operation of the device - acoustic pressure level at a distance of 1m: 41 to 51 dB(A) depending on the selected device power - coefficient Q2
Flat space heating or cooperation with a fan coil unit + Protection against freezing of condensate
Smooth power modulation ensures optimal operation depending on heating needs from 2.3 to 8.2 kW (A7/W35)

SVK Central Heating Buffer

Capacity: 104 liters
Energy class A - very good thermal insulation (PUR foam 65mm)
Accumulates heat in heating mode and cold in cooling mode
Extends the reliable operation time of the compressor by limiting the number of starts during transitional periods: spring - autumn
Supports the "defrost" function of the compressor without drawing energy from the heating circuits
Ensures optimal system operation by separating the hydraulic pump circuit from the heating circuits

SWPC Domestic Hot Water Heat Exchanger

Heat exchanger with the largest heating surface

Capacity: 300 liters, optimal for a 5-7 person family
Special design with two coils connected to a collector ensures a large flow and a heating surface of 4.22 m². This guarantees the highest pump efficiency.
Possibility of connecting 1 or 2 additional electric heaters

Watch the video and learn about the Kospel heat pump heating system

Product Details